蒸汽锻锤是冶金行业普通采用的锻钢设备,长城特殊钢公司第三钢厂锻钢车间1台3t蒸汽自由锻锤,其锤头与滑板润滑原来采用11号汽缸油,由于温升高(直接受钢坯热辐射)加油操作不便,加上负责人责任心不强,时常造成无油干磨状态,据测量每月滑板磨损达1mm左右,滑板间隙增大,造成锤头导向不好,锤杆易断裂,并且影响锻件质量。 Steam forging hammer is commonly used in the metallurgical industry forged steel equipment, the Great Wall Special Steel Company third steel forging plant 3 sets of 3t steam free forging hammer, the hammer and skateboard lubrication originally used on the 11th cylinder oil, due to the temperature rise ( Directly by the billet heat radiation) refueling operation inconvenience, coupled with the responsible person is not strong sense of responsibility, often resulting in dry oil-free state, it is measured monthly skateboard wear up to about 1mm, skateboard clearance increases, resulting in bad hammerhead, hammer Rod easily broken, and affect the quality of forgings.