一般等离子切割是采用大型固定式切割机。然而,小电流等离子切割装置适用于手工操作,携带方便。等离子切割是切割不锈钢、铝和其他有色金属,以及复合钢的最好最快的一种方法。但是,直到几年以前,等离子切割仍然采用大型切割机。在钢厂、大型钢服务中心、重型钢结构厂和巨型船厂均采用大型等离子切割机。由于切割速度快,因此,等离子切割仅限于切割平板。小电流等离子切割装置是一种携带式切割装置,设备费用小,便于安装、使用和维修。即使工作条件不是最好,也能切割得好。将一般等离子割 General plasma cutting is the use of large stationary cutting machine. However, the low-current plasma cutting device is suitable for manual operation and is easy to carry. Plasma cutting is the best and fastest way to cut stainless steel, aluminum and other non-ferrous metals, and composite steels. However, until a few years ago, plasma cutting still used a large cutting machine. In the steel mills, large steel service centers, heavy steel structures and giant shipyards are using large-scale plasma cutting machine. Due to the fast cutting speed, plasma cutting is limited to cutting the plate. Small current plasma cutting device is a portable cutting device, the device costs small, easy to install, use and repair. Even if the working conditions are not the best, but also cut well. General plasma cut