论文部分内容阅读
一、R62型平面磨床这种平面磨床(图1)为前装载式,即安装制件得从前面进行。制件的最大轮廓尺寸为:1370×406×850mm。工作台由液力驱动、自动运行距离约为1550mm,运行速度在0~3050mm/min 之间可任意调节。由于其工作范围宽和有一套带有冷却液中心分配装置的、直径为406mm 的扇形砂轮块组成的砂轮,所以为磨削多机型的缸体、缸盖提供了可靠的条件。为达到快速修整砂轮
A, R62-type surface grinder This type of surface grinder (Figure 1) is a front-loading, that is, the installation of parts from the front. Parts of the largest outline size: 1370 × 406 × 850mm. Workbench by the hydraulic drive, automatic running distance of about 1550mm, operating speed of 0 ~ 3050mm / min can be adjusted. Due to its wide operating range and the inclusion of a grinding wheel with a diameter of 406 mm with a center-of-coolant distribution device, it provides a reliable condition for grinding of multi-model cylinders and cylinder heads. To achieve quick dressing wheel