创维5T20机芯采用了东芝单片集成电路TB1240、5T20机芯的S状态与D状态维修项目及数据基本相同。 1.维修方式的进入及退出先按下电视机的本机“音量-”键到零,此时不放手,再按下遥控器上的“屏显”键,即可进入维修状态S模式。如果要进入D模式,则先放开“音量-”键和“屏显”键,再按下“屏显”键,使屏幕出现的S消失,再按下 Skyworth 5T20 movement using Toshiba monolithic integrated circuit TB1240, 5T20 movement of the S state and D state maintenance projects and data are basically the same. 1. Maintenance mode to enter and exit Press the TV’s local “volume -” key to zero, then do not let go, then press the “on-screen display” button on the remote control, you can enter the maintenance mode S mode. If you want to enter the D mode, first release the “volume -” key and “screen display” button, then press the “screen display” button to make the screen appear S disappear, then press