上犹水电站工地發电厂將一台引擎部分有缺陷致安裝后始終未曾投入运轉的發电机改为调相机。对调相机的起动方法作了几种比较,現在采用的是:用单独發电机起动。这在操作上和设备添置上都较简单,玆將经过情况及具体方法介绍如下。由于工地功率因数常在0.7上下,早就有建議把 On the Utah Hydropower Station site power plant will be a part of the engine has been defective due to installation has not been put into operation after the generator to adjust the camera. There are several comparisons of the start-up method of the recalibration camera, now using: starting with a separate generator. This operation and equipment purchase are relatively simple, it will be after the situation and specific methods are described below. As the site power factor is often in the upper and lower 0.7, it has long been suggested to put