以前我厂车床使用的不停车卡盘,均为套筒形式,每更换一次直径大小不同的工件,就要更换一次套筒夹子。这样,一个卡盘就要配一套大小不同的套筒夹子。为了减少更换辅助工时,提高生产效率和省去一套大小不同的套筒夹子配件,我们利用现有的三爪卡盘,改装成两种不同形式的不停车卡盘箱,经多年使用,证明效果良好。现介绍如下: Before the lathe used in our factory does not stop the chuck, are in the form of sleeves, each change a different diameter workpiece, it is necessary to replace the sleeve clip. In this way, a chuck must be equipped with a different size sleeve clip. In order to reduce the number of replacement man-hours, increase production efficiency and eliminate the need for a sleeve clamp fitting of different sizes, we retrofit into two different types of non-stop cartridge using the existing three-jaw chuck and after years of use, Good effect. Now introduced as follows: