论文部分内容阅读
如果采用下面介绍的简单刀头和模板,在立车上加工大型零件,机床可以不必经过任何改装。图1是加工球形端面的装置。1是工件,压紧在工作台2上。靠模板4夹紧在左刀架的刀夹中;模板上部(X-X平面)应平行于工作台2。模板的纵向和上下位置的调整,可通过左刀架的移动而获得。6是支架,上端和右刀架的刀夹5相连,下端跟刀头体7紧固在一起。9是带有车刀11的滑块可在刀头体
If you use the simple cutter and template described below, in the vertical machining of large parts, the machine can be without any modification. Figure 1 is a spherical end processing device. 1 is the workpiece, pressed on the table 2. Clamp in the holder of the left tool holder by template 4; upper part of the formwork (X-X plane) should be parallel to table 2. The vertical and vertical adjustment of the template can be obtained by the movement of the left turret. 6 is a bracket, the upper end of the knife holder 5 is connected to the right knife holder, the lower end of the body 7 is fastened together. 9 is a slider with turning tool 11 may be in the body