【摘 要】
:
用单颗粒模型研究了煤焦燃烧时焦碳氮转变成 NO的过程。模型中考虑了炭粒内部和外部温度和组分浓度的变化 ,在源项的处理上采用了简单的化学反应动力学机理模型。应用有限差
【机 构】
:
清华大学工程力学系!北京100084,清华大学工程力学系!北京100084,清华大学工程力学系!北京100084
论文部分内容阅读
用单颗粒模型研究了煤焦燃烧时焦碳氮转变成 NO的过程。模型中考虑了炭粒内部和外部温度和组分浓度的变化 ,在源项的处理上采用了简单的化学反应动力学机理模型。应用有限差分法对温度和组分浓度方程进行了离散化 ,并用 Gauss- Seidel迭代法对所得到的离散方程求解。计算结果表明 ,颗粒粒径、环境 NO和 O2 浓度对焦碳燃烧过程中 NO形成及还原都有重要的影响。
The single particle model was used to study the process of coke nitrogen transformation into NO during combustion of coal char. The model takes into account changes in temperature and component concentration inside and outside the char and uses a simple chemical reaction kinetic mechanism model for the source term. The temperature and component concentration equations were discretized using the finite difference method, and the resulting discrete equation was solved using the Gauss-Seidel iteration method. The calculated results show that the particle size, NO and O2 concentrations have an important effect on the formation and reduction of NO during the combustion of coke.
其他文献
We consider the verification problem of invariance properties for timed systemsmodeled by (extended) Timed Graphs with duration variables. This problem is in ge
基于微分动力学的不稳定流形定理,针对二维离散混沌动力系统,用不稳定流形的函数逼近系统。采取微扰控制方式,得出非线性反馈控制规律,稳定双曲平衡点。与OGY方法相比,增大了控制收敛
利用 1H- NMR测定了 E型环氧树脂的数均分子量 ,并利用 13C- NMR表征了 E型环氧树脂的微观结构。
The number average molecular weight of the E-type epoxy resin was det
为确定内型降冰片烯酰亚胺与甲基格氏试剂反应所得加成产物的结构,合成了标题化合物(C18H19NO2).其结构通过单晶X-射线衍射分析确定,该晶体属正交晶系,空间群为P212121,a=6.2
A new flavonol glycoside, isorhamnetin-3-O-β-D-xyloside, was isolated from the extract of leaves and twigs of Alchornea davidii (Euphorbiaceae). Its structure
使二氯氧锆水溶液与环氧氯丙烷相互作用可制得 ZrO(OH)2凝胶将凝胶干燥、灼烧即得二氧化锆超细粉 ZrO2超细粉为单斜晶,平均粒径为 9.6nm,比表面积为 95.3m2/g.用该法还可制得部分稳定化的 ZrO2.
The zirconium
由于高碘酸盐及其复盐晶体具有优良的电学性能和抗腐蚀性能,在分析上也很有应用价值[1]三元相高碘酸盐-高碘酸-水系统早在60年代就引起了人们的兴趣,Dratovsky等人对它进行了大量的研究[2-5].八十年代
已往对气泡射流的理论研究,主要集中在半经验和积分模型方面,对流动结构揭示很少.给出了气-液两相流两方程湍流模型.为了加深对气泡射流规律的理解和为数值计算建立对比基础,
The structure of syn- and anti-Nb-(p-toluenesulfonyl)-3a-hydroxyl-1, 2, 3, 3a, 8, 8a-hexahydro pyrrolo[2,3-b] indole-2-carboxylic t-butyl ester was stereoselect
采用变形玻昂迭代法 (DBIM )对 6FF40 (深感应测井仪 )的测量数据进行地层剖面重建。利用 6FF40的测量数据作为迭代的初始值 ,加快了迭代收敛速度 ;其次利用数值模式匹配(NMM )解的z向解析性质和径向线性插值方法 ,避免了双重数值积分。数值计算结果表明 ,上述两种方法应用后 ,其计算效率和反演质量均得到很大的提高。