结合膜囊重度缩窄,为安义眼行大范围乃至全结膜囊成形术,放入移植瓣后应安置支撑体。以往所用支撑物多系单块眼模或义眼。如选足够大眼模,置入不易,取出也难,换药不便。为此多年来笔者选用临场制作多片型眼模,具有造型容易,体积够大,利于分泌物排出,换药时便于随意取放,修整或重制。方法 Combined with severe narrowing of the capsule, eye-line for the safety and even the whole conjunctival angioplasty, placed in the flap should be placed after the support body. In the past used to support more than a single eye or eye prosthesis. If the election large enough eye mold, easy to insert, it is difficult to remove, dressing inconvenience. For many years, I choose to make multi-type intramuscular eye mode, with the shape is easy, large enough volume, which will help discharge secretions, when dressing for easy pick and place, trimming or remake. method