在有色合金压铸生产中,压铸机和感应电炉的冷却通常是单独进行的。它们的进水管各自从进水总管上接下来,出水管也是各自回到冷却水池中。这样,无论是用水泵打水循环冷却,还是用自来水放水冷却, 都需要两套水管。若用自来水冷却,冷却后的水自然流掉,这就需要双倍的水量。而当自来水水量较小时,常因感应电炉水流阻力大,压铸机水流阻力较小,出现压铸机流水畅通感应电炉不通水或水量不足的现 In non-ferrous alloy die-casting production, the die-casting machine and induction furnace cooling is usually carried out alone. Their inlet pipe from the inlet manifold on the next, the outlet pipe is each returned to the cooling pool. In this way, whether it is water cycle cooling with water pumps, or tap water cooling, you need two sets of pipes. If tap water is cooled, the cooled water runs off naturally, which requires double the amount of water. When the tap water is small, often due to induction flow resistance, die-casting machine flow resistance is small, die-casting machine flow through the induction furnace without water or insufficient water is now