论文部分内容阅读
1.通常的配置方法 (1)在进入Windows 95之前,用SoftSet2测试一下网络适配卡。从工作站上启动DOS,将EtherExpress PRO/10 LANAdapter磁盘插入软驱,键入:A:SoftSet2 (2)从Main Menu菜单中选择Test Adapter选项,验证网卡是否运行正确。如果网卡运行失败,在Windows 95下网卡也将不能正确运行。 (3)现在的EtherExpress PRO/10网卡一般都支持P＆P,由于Windows 95自动安装P＆P网卡,你可以运行Win-dows 95。 (4)启动Windows 95,Windows 95将自动识别网卡,并且将网卡设置成支持两种缺省的协议:IPX/SPX兼容协议和NetBEUI协议。 注意:如果Windows 95不能自动识别网卡,原因可能
1. Common Configuration Methods (1) Before entering Windows 95, use SoftSet2 to test the network adapter. To start DOS from a workstation, insert the EtherExpress PRO / 10 LANAdapter disk into the floppy drive and type: A: SoftSet2 (2) From the Main Menu, select the Test Adapter option to verify that the network card is working properly. If the network card fails to run, under the Windows 95 network card will not function properly. (3) The current EtherExpress PRO / 10 network cards generally support P & P, and since Windows 95 automatically installs the P & P network card, you can run Win-dows 95. (4) Start Windows 95, Windows 95 will automatically identify the network card, and the network card is set to support two default protocols: IPX / SPX compatible protocol and NetBEUI protocol. Note: If Windows 95 does not automatically recognize the network card, the reason may be