路面冷再生机在对旧沥青混凝土路面进行铣刨过程中,通过添加沥青、水等材料,搅制成路面基层材料,实现旧沥青路面材料的再生利用。本文介绍冷再生机转子升降机构的改进方法。1.冷再生机结构发动机安装在冷再生机机架上,其动力输出轴与转子轴线平行,发动机动力靠胶带驱动转子转动。铣刨机的铣刨拌合深度依靠转子升降进行控制,转子升降行程越大,铣刨和拌合调整幅度就越大。为了防止铣刨和拌合产生的粉料和块状物料飞溅,冷再生机设置了转子罩, Pavement cold reclamation machine in the old asphalt concrete pavement milling process, by adding asphalt, water and other materials, mixing into the road base material, to achieve the recycling of the old asphalt pavement materials. This article describes the improved method of cold regenerator rotor lift mechanism. 1. Cold Regenerator Structure The engine is mounted on a cold regenerative machine frame with its power take-off shaft parallel to the rotor axis. The engine power is driven by tape to rotate the rotor. Milling machine milling depth depends on the rotor lift control, the greater the rotor lift stroke, milling and mixing the greater the adjustment. In order to prevent the milling and mixing of powder and lump material splash, cold regenerator set rotor cover,