加工石墨阳极的特点是,阳极毛坯长短不一、弯曲变形、缺角缺边以圾表面残存着很硬的金刚砂。为保证加工质量、提高加工速度,我们分析了各种因素: 1.阳极两个侧面由于加工量小,可采用同时加工,不但可保证加工质量,而又缩短加工设备的总长度。 2.阳极上下两个表面由于切削面大、加工量大、刀具磨损快,如果也同时进行切削,不但使机床产生很大的振动,而且严重影响加工质量,所以要上下表面分别加工。 3.加工机床传送带上的搭勾是以推顶阳极两端面使其前进的,很容易碰损端面,故把阳极两端面的锯切工序放在四面加工之后进 Graphite anode processing characteristics, the length of the anode blank, bending deformation, lack of edge to the edge of the surface remains of residual hard diamond carborundum. In order to ensure the processing quality and increase the processing speed, we have analyzed various factors: 1. The two sides of the anode can be processed at the same time due to the small processing volume, which not only ensures the processing quality but also shortens the total processing equipment length. 2.At the upper and lower surfaces of the anode due to large cutting surface, large amount of processing, tool wear fast, if also cutting, not only to machine a great vibration, but also seriously affect the processing quality, so the upper and lower surface were processed. 3. Processing machine hook on the conveyor belt is to push the top of both ends of the anode to make progress, it is easy to touch the end face, so the two ends of the anode sawing process on the four sides after the process