论文部分内容阅读
The creep properties of solder alloys are an important factor affecting the reliability of soldered joints in surface mount technologies. Particle-enhancement is one way to improve the properties of solder alloys. The temperature of the solder joint is one of the primary factors affecting the solder joint creep prop-erties. Single shear lap creep specimens with a 1 mm2 cross-sectional area were fabricated using Ag parti-cle enhancement 99.3Sn0.7Cu based composite solder and 99.3Sn0.7Cu eutectic solder to examine the in-fluence of temperature on the creep behavior of solder joints. The results show that the solder joint creep resistance of the composite solder joint was generally superior to that of the 99.3Sn0.7Cu solder joint. The creep rupture life of the composite solder joint was reduced by increasing temperatures at a faster rate than that of the 99.3Sn0.7Cu eutectic solder joint.
The creep properties of solder alloys are an important factor affecting the reliability of soldered joints in surface mount technologies. Particle-enhancement is one way to improve the properties of solder alloys. The temperature of the solder joint is one of the primary factors affecting the solder joint creep prop-erties. Single shear lap creep specimens with a 1 mm2 cross-sectional area were fabricated using Ag parti-cle enhancement 99.3 Sn0.7 Cu based composite solder and 99.3 Sn0.7 Cu eutectic solder to examine the in-fluence of temperature on the creepage behavior of solder joints. The results show that the solder joint creep resistance of the composite solder joint was generally superior to that of the 99.3Sn0.7Cu solder joint. The creep rupture life of the composite solder joint was reduced by increasing temperatures at a faster rate than that of the 99.3Sn0.7Cu eutectic solder joint.