论文部分内容阅读
1.故障的排查(1)洒水系统不动作。原因与排除:洒水系统进入过载保护,若水箱补充水后,按下洒水智能控制器的“STOP”键解除保护;如果洒水智能控制器启动超时或水泵电机故障,系统仍进入过载保护,此时应检查水泵电机是否完好,管道是否堵塞,如果都正常,再按
1. Troubleshooting (1) sprinkler system does not move. If the sprinkler intelligent controller starts to overtime or the pump motor fails, the system will still enter the overload protection. If the sprinkler system goes into overload protection, if the water tank replenishes water, press the “STOP” key of the sprinkler intelligent controller to release the protection. At this point should check the water pump motor is intact, the pipeline is blocked, if all normal, then press