Design and experimental research on a visible-near infrared spatial modulating Fourier transform spe

来源 :OptoelectronicsLetters | 被引量 : 0次 | 上传用户:myloud911
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
A type of spatial modulating micro Fourier transform spectrometer (FTS) based on micro multi-step mirrors (MMSMs) is designed and manufactured in this paper. The interference system is based on Michelson interferometer, using two MMSMs instead of plane mirrors in two arms. The recovered spectrum is simulated with different distances between MMSMs and the detector, and the influence of diffraction on the recovered spectrum is analyzed. The edge-enlarging method for the MMSMs is proposed to eliminate edge noise, and the influence of surface roughness of MMSMs on the recovered spectrum is also analyzed. Moreover, the way of manufacturing the MMSMs is investigated.
其他文献
本文报道了用308 nm XeCl激光消融聚合物及生物组织和角膜刻划的研究结果,并与1.06 μm和0.53 μm的纳秒、皮秒YAG激光消融生物组织的结果作了对比。
X-ray drive asymmetry is one of the main seeds of low-mode implosion asymmetry that blocks further improvement of the nuclear performance of “high-foot” experiments on the National Ignition Facility [Miller et al., Nucl. Fusion 44, S228 (2004)]. More part
相移误差在很大程度上影响着相移数字显微全息的测量精度。相移误差可大致分为数值误差和不均匀误差两类。相移器的标定错误和环境震动都能产生不可忽略的数值误差,因此自定标相移数字全息是值得探究的。提出了一种基于载频条纹分析方法的自定标相移数字全息显微术。利用傅里叶条纹解调分析方法,分别提取四幅全息图的载频条纹相位。通过对比载频条纹相位获得全息图间的相移量。实验装置设计的不合理导致了不均匀误差。提出一种基于改进型Linik干涉仪的相移数字全息显微装置。实验结果证明了自定标算法和改进型的Linik干涉仪具有更好的重建
We report the upconversion luminescence of lithium fluoride single crystals excited by an infrared femtosecond laser at room temperature. The luminescence spectra demonstrate that upconversion luminescence originates from the color center of
In conventional pulsed laser deposition (PLD) technique, plume deflection and composition distribution change with the laser incident direction and pulse energy, then causing uneven film thickness and composition distribution for a multicomponent film and
A novel fiber-optic current sensing scheme is proposed by converting the Faraday rotation to the optical signal's degree of polarization (DOP) change. In this scheme, the lightwave passes through a fiber resonant cavity multiply and experiences Faraday r
自适应光学系统在天文望远镜观测和激光传输过程中常用来补偿大气湍流引起的波前畸变,压电陶瓷变形镜(PDM)是该系统常用的波前校正元件。在分析了PDM的性能参数,包括:适配误差、致动器的数目与空间布局、动态范围等基础上建立了基于19单元PDM的自适应光学实验系统。该系统采用Zernike模式法重构波前,闭环负反馈实时控制PDM补偿由Matlab模拟的3种波前像差:离焦、像散、彗差形成的波前畸变。实验结果表明,压电陶瓷变形镜在负反馈闭环自适应光学系统中对波前畸变有较好的校正能力。
焦斑的尺寸和形状主要由光束的波前畸变决定。为了减小大口径激光系统的波前畸变并提高焦斑能量集中度,对静态波前畸变采用了相位板补偿的方法。对于在建中的原型装置,主要考虑补偿主放大系统的波前畸变。根据补偿板摆放位置处的光通量和加工的难易程度,综合考察了四个摆放位置的优缺点,提出用补偿板替代腔镜对波前进行补偿。建立了求解补偿板面形的数值计算模型,就设计时采用的钕玻璃片滤波截止频率做了讨论,得出用0.01 mm-1的截止频率做低通滤波后可以得到最佳补偿效果,给出了补偿板的面形分布和加工方法。模拟结果表明,采用这种方
激光熔钎焊是利用两种合金熔点的差异,通过激光加热使低熔点材料(母材和填充材料)熔化,在接头界面与固态高熔点母材相互作用达到冶金结合的异种合金连接方法。按激光能量吸收机制对激光熔钎焊进行了分类,并结合所做工作,阐述了激光熔钎焊方法的发展及研究进展。
We have investigated the whole polarization-extinction-ratio (PER) spectrum and annealing properties of 45°-tilted fiber gratings (45°-TFGs). Experimental results show the PER spectrum of 45°-TFGs is a Gaussian-like profile and covers a 540 nm bandwidth f