论文部分内容阅读
笔者在从事维护和检修Canon LBP-BX Ⅱ、KT激光打印机近10年中总结出如下经验: 由于打印机使用时间较长,造成定影辊磨损,分离爪上有异物、脏迹,此时输出大样,会出现分离不佳,或大样卡在分离爪和定影辊上,成手风琴状。解决方法如下: 1.首先检查定影辊和压力辊上是否有脏迹或破损、摩擦痕迹及纸屑。如定影辊磨损,就应换掉,并清除压力辊上脏迹,涂上硅油,问题即可解决;
The author engaged in maintenance and overhaul Canon LBP-BX Ⅱ, KT laser printer in the past 10 years summed up the following experience: As the printer for a long time, resulting in fixing roller wear, separation claws foreign body, dirty, then output a large sample , There will be poor separation, or a large sample stuck in the separation claws and fixing roller, into an accordion-like. The solution is as follows: 1. First check the fixing roller and pressure roller for dirt or damage, friction marks and paper dust. Such as the fixing roller wear, it should be replaced, and remove the dirty roller pressure roller, coated with silicone oil, the problem can be solved;