论文部分内容阅读
为了提高充填作业效率,降低充填作业成本,针对充填开采关键设备底卸式输送机进行研究,设计更为合理的底卸式输送机的卸料孔,使卸料孔的卸料量大于充填作业面的来料量,从而满足充填作业对充填物料的需求。设计结果是卸料孔间距为3 m,确定卸料孔的形状为长方形,尺寸大小为400 mm×500 mm。
In order to improve the efficiency of filling operation and reduce the cost of filling operation, aiming at the bottom discharging conveyor of the key equipment for filling and mining, a more reasonable discharge hole of the bottom discharging conveyor is designed so that the discharging amount of the discharging hole is larger than the filling operation Surface of the incoming volume, so as to meet the filling operation of the filling material needs. The design result is the discharge hole spacing of 3 m, to determine the shape of the discharge hole is rectangular, the size of 400 mm × 500 mm.