近日,由三一重装主持编制的《移动实验室工程机械设备工况状态测试方法》被确立为国家标准项目。该标准由三一重装试验研究中心和标准化所负责推进,于2011年10月启动编制工作,先后两次修改,于2012年3月送审。编制前期,三一重装试验研究中心对国内外工程机械测试的标准化和可行性进行了调研,征集了各企业对机械产品测试的需求。因此,该标准重点考虑了现场试验 Recently, by the Sany reinstall presided over the preparation of “mobile laboratory engineering machinery condition status test method” has been established as a national standard project. This standard was promoted by Sany Heavy Machinery Research and Testing Center and Standardization Institute. The preparation was started in October 2011 and was revised twice. The trial was submitted for review in March 2012. In the early stage of preparation, SANY Heavy Duty Test and Research Center conducted research on the standardization and feasibility of construction machinery testing at home and abroad, and solicited the demands of various enterprises for testing mechanical products. Therefore, the standard focuses on the field test