切毡机是利用1瓩电动机,通过一对齿轮,带动轴转动。一组刀片固定在轴上,刀片与刀片间的距离由调正块(短管)来控制,调正块长度按所需毛毡的宽度决定,改变调正块的大小即可切割不同宽度的毛毡条。毛毡放在工作台面上,当脚踏于踏板上,通过升降板杠杆装置,使升降木板紧贴刀片下面,即将毛毡与刀片压紧,用手推动毛毡前移,即可将一整张的毛 Carpet machine is to use 1 瓩 motor, through a pair of gears, drive shaft rotation. A set of blades is fixed on the shaft. The distance between the blade and the blade is controlled by an adjustment block (short tube). The length of the adjustment block is determined by the width of the felt. The size of the adjustment block can be changed to cut different widths of felt Article. Felt on the countertop, when the pedal on the pedal, through the lifting plate lever device, so that the lifting board close to the blade, the felt and the blade is pressed, hand pushing the felt forward, you can put an entire piece of hair