四锤头锻模(图1)可以固定在机械压力机或水压机的工作台面上,用以替代原有普通锻模台。其使用方法为:当压机上梁向下移动时,借助专用锻模内部机构使毛坯受到来自四方的锻压力;当横梁上移时,各锤头离开锻件,同时利用操作器可使锻件作前后/翻转运动,从而锻压不同部位。通过循环重 Four hammer head forging die (Figure 1) can be fixed on the table of mechanical presses or hydraulic presses to replace the original ordinary die set. The use of the method is as follows: when the upper beam of the press moves downward, the blank is subjected to the forging pressure from the Quartet by means of the internal mechanism of the special forging die; when the beam is moved upward, the hammers leave the forging; meanwhile, Before and after / flip movement, so forging different parts. Through the cycle weight