【摘 要】
：
This study investigated the microstructure,mechanical,and damping properties of a non-age-hardened Al alloy (5086) and an age-hardened Al alloy (7075) after friction stir processing (FSP).Microstructural analyses indicate that FSP led the grain refinement
【机 构】
：
College of Material Science and Engineering, Guilin University of Technology, Guilin 541004, China;S
论文部分内容阅读
This study investigated the microstructure,mechanical,and damping properties of a non-age-hardened Al alloy (5086) and an age-hardened Al alloy (7075) after friction stir processing (FSP).Microstructural analyses indicate that FSP led the grain refinement of samples,and the grains size decreased with the decrease in the tool rotation rate.Furthermore,FSP with low rotation rate promotes the ηphase precipitation in the 7075 alloy,causing the micron-sized particles in the 5086 alloy to break up.After being subjected to FSP with low rotation rate,the 5086 and 7075 alloys exhibited excellent mechanical and damping properties.Such improved properties were ascribed to their equilibrium grain boundaries,fine grain,low density of dislocations,high fraction of high misorientation angle,and uniform particle distribution.
其他文献
Low cycle fatigue behavior of a quenched and tempered high-strength steel (Q960E) was studied in the strain amplitude ranging from ± 0.5％ to ± 1.2％ at room temperature.As a result of fatigue loading,the dislocation structural evolution and fracture mechan
The precipitation kinetics of σ phase in commercial HR3C heat-resistant steel during aging at 650-800 ℃ was studied in the paper.Through morphology,composition and structural analyzing on the second phase in the HR3C steel,it was confirmed that the precip
Using the flow stress curves obtained by Gleeble thermo-mechanical testing,the processing map of extruded magnesium alloy AZ31 was established to analyze the hot workability.Stress exponent and activation energy were calculated to characterize the deforma
In the present study,the effect of Zn content on the microstructure and deformation behavior of the as-cast Mg-Zn-Y-Nd alloy has been investigated.The results showed that as Zn content increased,the volume fraction of secondary phases increased.Moreover,t
It has been recently pointed out that the compositions of industrial alloys are originated from cluster-plus-glueatom structure units in solid solutions.Specifically for Ni-based superalloys,after properly grouping the alloying elements into Al,Ni-like (N
Workability domain without the onset of flow instability was developed by numerical simulation and response surface method (RSM) for complex-shaped straight spur gear forging.The processing map of AZ31B alloys was calculated from flow stress curves and th
In the present study,a novel bacterium (Marinobacter aquaeolei) was examined for its corrosion inhibiting behaviour against X80 pipeline steel.Electrochemical results showed that X80 steel immersed in the solution inoculated with M.aquaeolei possessed ver