论文部分内容阅读
Modeling the Dynamic Recrystallization of Mg-11Gd-4Y-2Zn-O.4Zr Alloy Considering Non-uniform Deforma
【出 处】
：
金属学报（英文版）
【发表日期】
：
0年期
其他文献
Effect of Cr Doping on the Surface Characteristics of Ni Metal Studied with First-Principles Calcula
The influence of Cr doping on the surface characteristics of Ni metal,including the surface energy,work function,adsorption and dissociation,has been investigated by means of first-principles calculation based on density functional theory.The results reve
The different types of metal powder used for selective laser melting (SLM) process would cause distinct corrosion behavior due to the uniformity of the obtained microstructure.The SLM-produced Ti-5Cu alloy using atomized Ti-5Cu metal powder (SLMed Ti-5Cu)
The microstructures and mechanical properties,especially creep properties,of the NiCrFe-based alloys with various contents of phosphorus and iron were investigated.The results showed that the tensile yield strength decreased with increasing iron contents
Influence of Static Low Electromagnetic Field on Copper Corrosion in the Presence of Multispecies Ae
The effects of low electromagnetic field (EMF) (B =2 mT) on the corrosion of pure copper in the absence and presence of multispecies marine aerobic bacteria were investigated in this work.The results showed that EMF has an inhibitory effect on copper meta
Quasi-In-Situ EBSD Observation of the Orientation Evolution in Polycrystalline Tantalum During Rolli
Texture Evolution, Formability and Ridging Resistance of a Sn-bearing Ferritic Stainless Steel Under
Masing Behavior and Microstructural Change of Quenched and Tempered High-Strength Steel Under Low Cy
Low cycle fatigue behavior of a quenched and tempered high-strength steel (Q960E) was studied in the strain amplitude ranging from ± 0.5％ to ± 1.2％ at room temperature.As a result of fatigue loading,the dislocation structural evolution and fracture mechan
The precipitation kinetics of σ phase in commercial HR3C heat-resistant steel during aging at 650-800 ℃ was studied in the paper.Through morphology,composition and structural analyzing on the second phase in the HR3C steel,it was confirmed that the precip
Using the flow stress curves obtained by Gleeble thermo-mechanical testing,the processing map of extruded magnesium alloy AZ31 was established to analyze the hot workability.Stress exponent and activation energy were calculated to characterize the deforma
In the present study,the effect of Zn content on the microstructure and deformation behavior of the as-cast Mg-Zn-Y-Nd alloy has been investigated.The results showed that as Zn content increased,the volume fraction of secondary phases increased.Moreover,t