Effects of Nd on microstructure and mechanical properties of as-cast Mg-8Li-3Al alloy

来源 :Journal of Rare Earths | 被引量 : 0次 | 上传用户:chino80
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Effects of Nd on microstructure and mechanical properties of as-cast Mg-8Li-3Al alloy were investigated by OM,X-ray diffraction(XRD),EPMA,scanning electron microscopy(SEM) and energy dispersive spectroscopy(EDS).The results showed that the dendrites sizes of α phase were decreased by the Nd addition.When the amount of addition Nd was 1.6 wt.%,the alloy with the smallest α phase was obtained.The refining mechanism mainly owed to the increasing constitutional supercooling at the solidification front.Furthermore,the compound Al 2 Nd generated by the reaction of Al and Nd,which distributed at the phase boundary and inside β phase,could also restrain the growth of α phase.Nd could improve the tensile strength and elongation of Mg-8Li-3Al alloy,however,excessive Al 2 Nd might also become crack source and decrease the elongation. Effects of Nd on microstructure and mechanical properties of as-cast Mg-8Li-3Al alloy were investigated by OM, X-ray diffraction (XRD), EPMA, scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) that the dendrites sizes of α phase were decreased by the addition of Nd. The amount of addition of Nd was 1.6 wt.%, the alloy with the smallest α phase was obtained. The refining mechanism mainly owed to the increasing constitutional supercooling at the solidification front .Furthermore, the compound Al 2 Nd generated by the reaction of Al and Nd, which distributed at the phase boundary and inside β phase, could also restrain the growth of α phase. Nd could improve the tensile strength and elongation of Mg-8Li- 3Al alloy, however, excessive Al 2 Nd might also become crack source and decrease the elongation.
其他文献
一、概述“计算机多用户核能谱数据获取与处理系统”能在不同的实验坏境中实现能谱数据的获取,而要对所获取的数据进行处理是相当复杂的,有各种不同的分析方法。为了方便用
为了寻找能阻滞锝、碘迁移的地质材料。本工作研究了黄铜矿,方铅矿、稀土赤铁矿,辉锑矿,辉铜矿,黄铁矿等六种矿物对碘和锝的吸附和解吸。结果表明黄铜矿,方铅矿对碘的吸附较
根据逆环状流膜态沸腾(IAFB)的可视化实验结果,将该流型理想化为一个两区物理模型。按双区物理模型假定,建立二维、二流体数学解析模型。它由质量、动量和能量守恒微分方程以
本文叙述的ST1431型红光塑料闪烁体,其相对发光效率≥100%(相对于英国NE108型),发光衰减时间5.6—8.2ns,主峰波长590—605nm。文中分析了影响性能的因素,讨论了发光效率、发光
在离子注入材料改性的研究过程中(金属、绝缘材料和光学材料等),在许多场合下,要求注入的元素(如Fe中注入N、Y、Ph和Sn等)在靶子中占百分之几的含量,这就要求注入剂量高达10
一、基本方程与计算方法 1.锯齿模式锯齿上升部分可做如下解释,焦耳加热使电流分布变尖,q减小,致使m=1的撕裂模变得不稳定,磁岛将增长。r_s是q=1处的半径,由下式给出 q(r_s)
【摘要】目的探讨分析短暂性缺血发作患者血流变学改变及其临床意义。方法随机抽取在我院接受治疗的患有短暂性脑缺血的患者50例作为实验组,在随机抽取50例健康人作为对照组。比较观察两组患者血流学变化,进行对比分析。结果实验组红细胞压积、全血高切年粘度、全血低切粘度、血浆粘度、纤维蛋白原水平明显高于对照组,统计学上有意义(P0.05)。  1.2方法对随机抽取的这50例健康人做体检,保证这些人群无其他器质
本文研究了实验室合成的交换剂钛酸钠(ST)对模拟高放废水中锕系和裂片核素交换速度、吸附分配比和交换容量等交换性能,研究了某些阳离子及络合剂和辐照对其交换性能的影响。
【摘要】目的探讨甲状腺腺瘤手术的治疗方法。方法随机选取我院近年来收治的80例甲状腺腺瘤患者完整资料为回顾性分析依据。结果本组80例患者均康复出院,术后随访发现,行单侧甲状腺腺瘤切除术者无一例复发,双侧甲状腺腺瘤者中,2例行一侧次全切除另侧全切除术者于术后第3年因初次手术腺体肿瘤残留而复发。结论甲状腺全切除术或次全切除术为治疗甲状腺腺瘤的有效手段,首次手术方式的选择是否合理为决定术后甲状腺腺瘤复发的
本文叙述了防止压水反应堆压力容器脆性破坏的运行控制原理及用线弹性断裂力学理论计算运行限制压力的计算方法. This paper describes the operating principle of prevent