我县修造厂自己制造了一套简单压修工具,用来修复高压胶管接头,经五、六年的实践,效果很好.用此工具曾为各种拖拉机、推土机液压系统压修高压油管接头,也为本厂生产的一批液压铆钉机配压胶管,试验压力较高,而且在较高的压力下使用多年,均未发现拔脱渗漏现象.压修时用10～15吨的压力一次压成,甚为方便.如无压力机或压力不足,可分两次压成,或分两次用重磅大锤锤击,砸好的接头效果也很好. Our factory built a set of simple pressure repair tools, used to repair high pressure hose connector, after five or six years of practice, the effect is very good. With this tool for a variety of tractors, bulldozers hydraulic system pressure repair high pressure pipe fittings , But also for the factory production of a group of hydraulic riveting machine with a pressure hose, the test pressure is high, but under high pressure for many years, have not found the phenomenon of pull-off leakage. Pressure repair with 10 to 15 tons of pressure Once pressed, is very convenient. If no pressure or lack of pressure, can be pressed into two times, or in two heavy sledgehammer hammer, smashing the joint effect is also very good.