由于钛合金的比重轻、强度高、耐腐蚀(450℃以下),所以在近代得到了实际的应用。加工钛合金时,首先要求刀具必须保持锋利。切削钛合金有一种倾向;切屑粘结刀刃,当粘结较紧时特别有害,尤其是用铣刀或立铣刀切削时,刀刃极易损坏,因此推荐使用有效的切削液,这样不仅可以减少切屑粘结的程度,而且还能使刀具持续切削较长时间。不过市场上售出的切削液往往化学活性较高,可引 Due to the light weight of titanium alloy, high strength, corrosion resistance (450 ℃ below), so in the modern get practical application. When processing titanium, the first requirement of the tool must be sharp. There is a tendency to cut titanium alloys; the chip-bonding edges are particularly detrimental when tight bonding, especially when cutting with a milling cutter or end mill, which can easily be damaged by the use of an effective cutting fluid, which not only reduces Chip bonding degree, but also make the cutting tool for a long time. However, the cutting fluid sold on the market is often high chemical activity, can be cited