S1118A 混砂机是国内性能优良的混砂机之一,但由于其生产率高,卸料门开口过大,因此卸砂过快,致使胶带机上的砂流量过大,导致胶带机上的犁式卸料器及双轮松砂机入口处型砂溢出胶带机之外。一般的工厂由于混砂机与其下的胶带机高差不大,不宜安装缓冲料斗来解决,因此希望将卸料门改小些。另外原 S1118A Sand Mixer is one of the best sand mixer in China. However, due to its high productivity, the opening of the discharge gate is too large, so the unloading of sand is too fast, resulting in excessive flow of sand on the belt conveyor, leading to plow discharge on the belt conveyor Feeder and two-wheel sand-sanding machine at the entrance sand overflow tape machine outside. General factory due to sand mixer and the next tape machine height difference is not appropriate to install buffer hopper to solve, so I hope to change the discharge door smaller. Another original