【摘 要】
：
In this paper, the mathematical model of distribution of the injected compound in biological liquid flow has been described. It is considered that biological liquid contains a few phases such as water, peptides and cells. The injected compound (for exampl
【机 构】
：
OrenburgStateUniversity13Pobedyst.,Orenburg460018,Russia
【出 处】
：
JournalofInnovativeOpticalHealthSciences
论文部分内容阅读
In this paper, the mathematical model of distribution of the injected compound in biological liquid flow has been described. It is considered that biological liquid contains a few phases such as water, peptides and cells. The injected compound (for example, photosensitizer) can interact with peptides and cells. At the time, viscosity of the biological liquid depends on pathology present in organism. The obtained distribution of the compound connects on changes of its fluorescence spectra which are registered during fluorescent diagnostics of tumors. It is obtained that the curves do not have monotonic nature. There is a sharp curves decline in the first few seconds after injection. Intensivity of curves rises after decreasing. It is especially pronounced for wavelength 590 nm and 580 nm (near the \transparency window" of biological tissues). Time of in- flection point shifts from 8.4 s to 6.9 s for longer wavelength. However, difference between curves is little for different viscosity means of the biological liquid. Thus, additional pathology present in organism does not impact to the results of in vivo biomedical investigations.
其他文献
基于线阵时间延迟积分(TDI)电荷耦合器件(CCD)机动成像原理,分析了灵巧卫星在姿态机动过程中动态成像的几何畸变问题。由于地球曲率及姿态机动因素导致像面空间几何映射形状不断改变,通过光线追迹逐点匹配算法推导出了机动成像方式下的空间成像几何关系数学解析表达式。利用小卫星姿态控制系统物理仿真平台对TDI CCD相机机动成像快速几何校正算法进行实验验证,姿态角确定精度与姿态稳定度优于0.05°、0.0
光波导是集成光学中的基本元件之一,构建于光波导结构上的波导激光器是一种微型激光源,近年来受到较多研究人员的关注,并有望在未来光子学系统中发挥重要的作用。激光晶体是固态激光器的主要增益介质之一。本文综述了基于激光晶体的固态波导激光器的最新研究进展,包括连续波波导激光器和脉冲波导激光器(调Q或锁模),其工作波长涵盖了从可见光到中红外的各个波段;还对波导激光研究的未来发展方向进行了展望。
当前较多图像篡改检测算法主要是依靠测量图像间的距离来匹配像素特征,以此来实现图像的篡改检测,但其没有考虑图像特征间显著特征的关联性,导致检测结果存在误检等弊端。为此,设计了灰度差异耦合显著特征的图像复制-粘贴篡改检测算法。首先,借助Harris算子,从待检测图像中提取初始特征,并利用像素点间的灰度差异信息,删除伪特征,以得到准确度较高的图像特征。然后,将Haar小波作为求取图像特征方向信息的依据,
采用基于DFT理论的第一性原理方法研究了Ag-N共掺杂纤锌矿ZnO的晶格结构和电子结构, 计算了包括共掺杂体系的晶格常数、杂质形成能和电子态密度等性质。研究结果显示, 共掺改善了杂质原子对体相晶格结构的扰动, 提高了掺杂的稳定性。此外, 电子结构的计算表明共掺形成的受主能级较单掺时更浅, 且空穴态的局域性降低, 从而改善了p型ZnO的传导特性, 表明受主共掺可能是一种比较有潜力的p型ZnO掺杂方式。计算与实验结果符合, 为受主共掺形成p型ZnO的机理提供了理论支持。
采用高温熔融法制备了Yb3 与Er3 共掺的氟氧化物玻璃, 并与Er3 单掺的玻璃进行对比, 对其光谱性质进行研究。通过对样品差热分析(DTA)曲线的研究, 确定热处理温度为552 ℃, 在该温度热处理后的样品内部形成微晶。980 nm激光激发样品的近红外荧光光谱是在室温下进行的。结果表明, 随着样品中Yb3 含量的增加, 近红外发光强度增加。这是因为在980 nm抽运光激发下, Yb3 离子吸收能量, 电子从2F7/2能级跃迁到2F5/2能级, 然后处于激发态的Yb3 离子通过共振能量传递方式将抽运能量
红外瞄具减振系统对红外瞄具承受高强度冲击至关重要：减振效果的好坏直接影响武器的射击精度及可靠性。基于响应面法在Ansys Workbench中对红外瞄具及其减振系统进行参数化建模和有限元分析，模拟200 g冲击载荷下减振系统最大位移响应对结构参数的响应面曲线，进而设置减振连接装置的结构参数对最大位移响应的灵敏度：最大位移响应对结构参数的变化率。以此判断最大位移响应关于结构各参数的敏感性，并指导优化方向。优化分析板簧宽度、高度、厚度等结构参数对最大位移响应的影响规律。结果表明减振元件板簧组的宽度是最敏感的参
A long-range phase-sensitive optical time-domain reflectometry is proposed and experimentally demonstrated, based on the gated Raman amplification (RA). This technique can reduce the amplified spontaneous emissions (ASE) noise of the Raman pump while exte