论文部分内容阅读
Laser texturing for design of superhydrophobic metal surface
【出 处】
：
光电工程
【发表日期】
：
2017年44期
其他文献
气溶胶已被确定为辐射强迫评估中的不确定因素之一。激光雷达是气溶胶观测的有效遥感工具。利用车载激光雷达，采用固定垂直探测与移动走航监测相结合的探测方式，对安平县的颗粒物浓度进行了连续探测。固定探测结果与环保部空气质量先上升后下降的趋势一致。移动导航探测能够快速、准确地定位污染源的位置。最后，通过对比喷撒抑尘剂前后的走航监测结果，得出喷撒抑尘剂可以有效降低颗粒物浓度。
Complementary transmissive ultra-thin meta-deflectors for broadband polarization-independent refract
Polarization manipulation is a significant issue for artificial modulation of the electromagnetic (EM) wave, but general mechanisms all suffer the restriction of inherent symmetric properties between opposite handedness. Herein, a strategy to independentl
期刊
A way resulting in lasing without inversion (LWI) in an open resonant Λ-type system from a nonlinear dynamics viewpoint is investigated. The destabilization of the non-lasing solution can occur not only through pitchfork bifurcation, giving rise to contin
A compact multipass cell with low fringes and high thermal stability is described. This cell is formed by two twisted cylindrical mirrors. The optical parameters are determined based on the selection criteria, which include mirror filling efficiency, inte
By using the closed orbit theory, the photodetachment cross section of H- near a metal surface is derived and calculated. The results show that the metal surface has great influence on the photodetachment process. As the ion-surface distance is very large
对自锁模掺钛宝石激光器的原理作了较详细的描述,指出克尔(Kerr)透镜效应是形成自锁模的主要原因。但是,只有将克尔透镜自聚焦、振荡光参数和泵浦光参数三者结合起来考虑,才能全面了解自锁模的形成过程。本文从速率方程出发,得出了激光介质增益与光束参数的相对变化曲线,并据此来优化自锁模钛宝石激光器的设计。最后.将计算结果与实验作了比较,两者符合得较好。
A developing application of laser-driven currents is the generation of magnetic fields of picosecond–nanosecond duration with magnitudes exceeding
期刊
叙述了微微秒激光的一个例子之后，我们研究了激光-等离子体相互作用的某些方面，并指出用目前我们所知道的一些激光，可以将靶的原子几乎全部电离。复合则能使被强烈电离的离子的亚稳能级的粒子数特别增加，因此对于10埃附近的波长来说可以作为等离子体放大器。
期刊
设计了一种嵌入磁性材料微腔的可调制的PT对称结构。通过传输矩阵法计算结构的传输谱,研究了磁微腔共振对PT对称结构的调制效应,得到一种可被入射角度方向和大小双重调制的增强的非互易带边模式,调制结果是带边模式在左右带边的转换。磁场大小的增加会导致带边模式向高频移动,磁场方向的变化也会引起带边模式在左右带边的转换。