论文部分内容阅读
随着定型组合钢模板使用范围的扩大,组合钢模板在圈梁、抗震柱施工中的应用日益广泛,本文介绍一种与之相适应的支模新方法。该方法采用工具式支撑固定组合钢模板进行砖混结构的圈梁和抗震柱施工。支撑由穿墙板、夹板和销片组成。该支撑适用于240、370mm砖墙中各类抗震柱和宽度120、180、240、300、370mm,高度≤240mm的圈梁支模。穿墙板上的固定销子至两个销片孔之间的距离分别适合240mm、370mm厚的砖墙。穿墙板上另有三个圆孔作为备用销孔,备用销孔与销片孔之间的距
With the expansion of the scope of the use of the fixed combination steel template, the application of the composite steel template in the construction of the ring beam and the seismic column has become increasingly widespread. This paper introduces a new method of supporting the mold. The method adopts a tool supporting and fixing combined steel template to perform the construction of ring beams and seismic columns of the brick-concrete structure. The support consists of wall panels, cleats and pins. The support is suitable for all kinds of seismic columns in 240, 370mm brick walls and ring beam models with widths of 120, 180, 240, 300, 370mm and heights ≤ 240mm. The distance between the fixing pins on the wall plate and the two pin holes respectively fits a brick wall of 240mm and 370mm thickness. There are three other holes on the wall plate for the spare pin hole, the distance between the spare pin hole and the pin hole