我厂在引进国外产品中,有一种舌簧式轴用挡片,它比现用的轴用弹性挡圈(GB894—67)装拆方便,无须专用工具,但所需材料较多,适用于装拆较多的轴销固定。现介绍给大家供参考。安装时先将上半片扳起,将下半片推入轴的槽中,然后将上半片揿入轴中固定,见附图。附表为参照d=10mm实物尺寸,按比例草拟的系列尺寸,供参考。挡片的材料从外观及磨火花看,系20镀锌钢板,冲压成形后弯曲而成,不需热处理。 I plant in the introduction of foreign products, there is a reed shaft with the block, which is more than the existing shaft with the circlip (GB894-67) easy assembly and disassembly, without special tools, but the required material more applicable to Assembly and disassembly more shaft pin fixed. Are introduced to you for reference. First install the first half of the wrench, the lower half of the push into the shaft slot, and then the upper half 揿 into the shaft fixed, see photo. Schedule for the reference d = 10mm physical dimensions, the scale of the draft series, for reference. Baffle material from the appearance and grinding sparks look, the Department of 20 galvanized steel, bending formed by stamping, without heat treatment.