论文部分内容阅读
本结构为汉江机床厂龙门式导轨磨床成形修正器,其运动原理如下: 修正时,压力油通过油管1进入油缸2,推动带齿条的活塞3作往复运动。由于齿条与齿轮4相啮合,通过齿轮4带动三角滑枕5上的齿条6作往复运动,实现金钢占7、8的往复运动,从而完成砂轮的修正。角度位置调整借助旋钮11、12而实现,修正砂轮的进给转动手轮9、10来实现。示如图1、2。该修正器的优点是:由于增强了修正器的刚性和导向性,克服了抖动现象,保证了砂轮角
The structure of the Hanjiang Machine Tool Plant gantry rail grinding machine forming corrector, the movement principle is as follows: When amended, the pressure oil into the cylinder 2 through the tubing 1, pushing the rack with the piston 3 for reciprocating motion. As the rack and the gear 4 meshing, driven by the gear 4 on the triangular ram 5 rack 6 reciprocating motion to achieve the reciprocating motion of the steel 7,8 to complete the grinding wheel correction. The angular position adjustment is realized by means of the knobs 11 and 12, the correction of the feed of the grinding wheel and the rotation of the handwheels 9 and 10. Shown in Figure 1,2. The advantages of this corrector are as follows: Due to the increased rigidity and guiding of the corrector, the jitter is overcome and the grinding wheel angle