【摘 要】
：
A micro-scale finite element method (FEM) was proposed to precisely calculate the heat conduction between mortar and aggregate, and thus to accurately predict the non-uniformity of concrete pouring temperature. The concrete temperature field during vibrat
【机 构】
：
State Key Laboratory of Simulation and Regulation of Water Cycle in River Basin, China Institute of
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
A micro-scale finite element method (FEM) was proposed to precisely calculate the heat conduction between mortar and aggregate, and thus to accurately predict the non-uniformity of concrete pouring temperature. The concrete temperature field during vibration was also precisely calculated by accurate description of heat absorption characteristics of different parts of concrete when vibration. Based on the above method, the prediction model was used to predict the pouring temperature of a practical engineering. The comparison between actual results and simulated values shows that this method can be adopted to accurately predict the non-uniformity of concrete pouring temperature and the influence of mechanized vibration on concrete pouring temperature, and thus accurately predict pouring temperature. The control of casting temperature is crucial for preventing concrete fracture. The study provides a new method for predicting the pouring temperature of concrete structures, which has great practical value in engineering application.
其他文献
A simple strategy was developed to prepare a tough, self-healing, antibacterial and moldable hydrogel by introducing the natural polyphenolic compound tannic acid (TA) as a cross-linking center for hydrogen bonds. Polyvinyl alcohol (PVA)-TA hydrogel was p
Nano-spherical Co2+-doped FeS2 was synthesized through a simple solvothermal method. The products were investigated using XRD, FE-SEM, BET, ICP, EDS, TEM, HRTEM, XPS, and UV-vis spectroscopy. The results indicated that Co2+ ion could change the particle n
The La-Mg-Ni-Mn-based AB2-type La1-xCexMgNi3.5Mn0.5 (x = 0, 0.1, 0.2, 0.3, and 0.4) alloys were fabricated by melt spinning technology. The effects of Ce content on the structures and electrochemical hydrogen storage performances of the alloys were studie
Three different kinds of coatings were coated on the concrete surface, and the changes in appearance, surface roughness, microstructure and components of coatings in artificial sewage were investigated. In addition, the strength, micrograph, mineral compo
Polytetrafluoroethylene (PTFE) is a commonly used seal material for oil-free engine that is well known for its excellent tribological properties. In this work, the nano-ZrO2 particles were used as the friction modifiers to improve the friction and wear pe
Sapphire,belonging to hexagonal crystal system,is typically anisotropic which makes it direction-sensitive.To research the effects of growth directions on properties of sapphire,c-[0001]seed(c-sapphire)and a-[11-20]seed(a-sapphire)were used to prepare sap
Silicon nitride ceramics were prepared by means of a hot-press sintering method. The ablation behavior was studied by plasma wind tunnel tests. The data suggested that, under low heat flux and stagnation pressure conditions, the ablation process was contr
A three-dimensional dynamic model for nano/micro-fabrications of silicon was presented.With the developed model, the fabrication process of silicon on nothing (SON) structure was quantitatively investigated. We employ a diffuse interface model that incorp
ZrB2-SiC based ultra-high temperature ceramic (UHTC) struts were firstly proposed and fabricated with the potential application in the combustor of scramjets for fuel injection and flame-holding for their machinability and excellent oxidation/ablation res
Calcium sulfate whisker (CaSO4 whiskers), a new type of microfiber material, was used in cement matrix to increase the strength of the cement based composites. Effect of CaSO4 whiskers on the mechanical properties of the resulting cement mortar was also s