一、概述从目前国内外各种手表夹板零件的生产现状和发展趋势来看,正在明显地朝着多工位机床、带料生产和组合加工方向发展。尤其是主夹板的生产,国内外各表厂早已普遍采用各种多工位机床加工,大大简化了生产工艺,降低了生产成本。如:瑞士目前手表主夹板的加工设备就主要有两种形式:一是转盘式多工位钻铣机床,二是直线式多工位夹板生产自动线。小夹板的生产,也主要有三种形式:一是采用转盘式多工位钻铣机床对不同类型或同类型的组合夹板进行组合加工,二是采用直线式多工位夹板生产线加工组合夹板,三是采用带料加工自动线。手表夹板的这种现代化多工位加工方式,比起 First, an overview From the current domestic and international production of a variety of watch splint parts of the status quo and development trend, is clearly toward the multi-station machine tools, with the material production and processing direction of combination development. In particular, the production of the main plywood, the table at home and abroad have long been widely used in a variety of multi-station machine tool processing, greatly simplifying the production process and reduce production costs. Such as: Switzerland currently watch the main splint processing equipment there are two main forms: First, turntable multi-station drilling and milling machine tools, and second, a straight line multi-station splint production line. Small splint production, there are three main forms: First, the use of turntable multi-station drilling and milling machine for the combination of different types or types of portfolio splint processing, the second is the use of linear multi-station plywood production line processing splints, three Is the use of automatic processing with the material line. Watch plywood of this modern multi-station processing methods, compared to