论文部分内容阅读
本文主要包括三个部分。首先,对矿体各种厚度参数下了确切的定义和进行了科学分类。其次,应用投影几何中“高平齐、宽相等、长对正”的原理,采用解析几何方法,密切结合实际经验,系统地推演出各种不同探矿工程条件下所遇矿体(或岩、矿层)的真厚度,水平厚度和铅直厚度的计算公式,并经勘探报告储量计算实践检验证明文中二十四个主要公式和八个辅助公式完全正确,尤其是在沉积和沉积变质矿床之矿区使用钻探勘探时更为适用。最后部分着重阐述并论证了常用矿产储量计算方法中各自应该选用的矿体厚度参数。
This article mainly includes three parts. First of all, the various parameters of the thickness of the ore body under the exact definition and scientific classification. Secondly, based on the principle of “high flushness, equal width and long alignment” in projection geometry, the analytic geometry method is used in combination with the actual experience to systematically deduce the ore body (or rock and ore layer) encountered under various prospecting conditions ) True thickness, horizontal thickness and vertical thickness of the formula, and by the exploration report reserves calculation Practice test Proof of twenty-four main formulas and eight auxiliary formula is completely correct, especially in the deposition and deposition of metamorphic deposits in the mining area Drilling exploration is more applicable. In the last part, the author mainly elaborates and demonstrates the parameters of ore body thickness which should be used in the calculation of common mineral reserves.