【摘 要】
：
In the electromagnetic induction-controlled automated steel teeming (EICAST) technology of ladle,the height and location of the blocking layer are critical factors to determine the structure size and installation location of induction coil.And,they are al
【机 构】
：
Key Laboratory of Electromagnetic Processing of Materials(Ministry of Education), Northeastern Unive
论文部分内容阅读
In the electromagnetic induction-controlled automated steel teeming (EICAST) technology of ladle,the height and location of the blocking layer are critical factors to determine the structure size and installation location of induction coil.And,they are also the key parameters affecting the successful implementation of this new technology.In this paper,the influence of the liquid steel temperature,the holding time and the alloy composition on the height and location of the blocking layer were studied by numerical simulation.The simulation results were verified by 40 t ladle industrial experiments.Moreover,the regulation approach of the blocking layer was determined,and the determination process of coil size and its installation location were also analyzed.The results show that the location of the blocking layer moves down with the increase in the liquid steel temperature and the holding time.The height of the blocking layer decreases with the increase in the liquid steel temperature;however,it increases with the increase in the holding time.The height and location of the blocking layer can be largely adjusted by changing the alloy composition of filling particles in the upper nozzle.When the liquid steel temperature is 1550 ℃,the holding time is 180 min and the alloy composition is confirmed,the melting layer height is 120 mm,and the blocking layer height is 129 mm,which are beneficial to design and installation of induction coil.These results are very important for the industrial implementation of the EICAST technology.
其他文献
The microstructure and fracture toughness of weld metal under Ti-free and Ti-containing different fluxes were investigated in this study.It was found that the trace element Ti of flux in submerged arc welding produced significant influence on the fracture
Optimization of grain boundary engineering (GBE) process is explored in a Fe-20Cr-19Mn-2Mo-0.82 N high-nitrogen and nickel-free austenitic stainless steel,and its intergranular corrosion (IGC) property after GBE treatment is experimentally evaluated.The p
The inclination angle of the flake particle has a significant impact on the in-plane thermal conductivity of composites.The graphite flake/Al composites (50 vol％) with different inclination angles were fabricated via flake powder metallurgy,and the result
High-strength,corrosion-resistant,and lightweight Al-Mg alloys perform an important function in harsh coastal service environments.Corrosion resistance is generally inversely correlated with strength;hence,it is difficult to simultaneously optimize both.I
Ni-Mo-P coatings are obtained at the surface of ceramic substrate by electroless deposition using palladium as a surface catalyst.The influence of catalyst activation conditions on coatings\' properties was assessed by structural,morphological,electrica
Mg and its alloys are the lightest structural metals available and are extremely attractive for applications as lightweight components,particularly in the automobile,electronic,and aerospace industries.The global market for wrought Mg alloys has steadily
The microstructure,mechanical properties and corrosion behavior of Mg-2Zn-0.6Zr alloy under the as-cast and asextruded conditions were investigated.Microstructure analysis indicated the remarkable grain refinement by extrusion,as well as notable reduction
Machining,especially dry machining of titanium alloys,has been one of the most significant challenges for carbide cutting tools.In this study,aluminum-rich AlTiN coating,as well as TiA1SiN nanocomposite coating,were successfully employed for dry milling o
An M-coated Mg-8 mass％ Li alloy rectangular bar was fabricated by hot extrusion,and then,it was hot-rolled into a thin sheet.The Al coating was uniform in thickness and had good bonding with the substrate during all the processing.This Alcoated Mg-Li allo
A new kind of Mg-2Zn-0.6Ca (wt％) alloy was fabricated by casting and hot extrusion as a high-ductility structural material.The extruded alloy exhibits a superior elongation of ～ 30％,yield strength of 130 MPa and ultimate tensile strength of 280 MPa along