一、概述本自动线由9台双面臣卜式组合机床和孔深检查吹屑装置组成。输送部分由主输送装置、横输送装置、翻转装置及回转装置组成;还有纵贯全线的链条刮板式排屑装置;在线的末端有一个料斗式铁屑提升装置。还有6个电气柜、7个液压站、1个操纵台。全线成 L 形布置(图1) First, an overview of this automatic line by 9 sets of double-sided Chen Bu combination of machine tools and holes deep blowing device to check the composition. The conveying part is composed of main conveying device, horizontal conveying device, overturning device and revolving device. There is chain scraper type chip removing device which runs through the whole line. There is a hopper type iron scraper lifting device at the end of the line. There are 6 electrical cabinets, 7 hydraulic stations, 1 console. All lines into an L-shaped layout (Figure 1)