Steels for the hydrogen economy

来源 :第五届宝钢学术年会 | 被引量 : 0次 | 上传用户:yingying0615
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  Our research program seeks to understand the influence of hydrogen on steels for the hydrogen economy.The present paucity of affordable hydrogen-proof materials poses strong technological and economic barriers to the hydrogen economy.Our research seeks to understand the behaviour of medium-strength-steels.Our research includes: (i) understanding the hydrogen influence on steels using the linearly increasing stress test ( LIST) and fatigue tests for electrochemically charged specimens;( 2) evaluating the hydrogen fugacity equivalent to the electrochemical hydrogen charging,using ( i) electrolytic permeability experiments and ( ii) thermal desorption spectroscopy ( TDS).The approach for each is described.The theoretical underpinnings are explained.The first results are presented and the future research directions explained.
其他文献
我国大城市发展迅速,城市地域范围不断扩张,并向城市群体空间演进,出现了都市区等新的城市空间形态。但不断恶化的城市交通问题正成为制约都市区化积极推进的桎梏。传统的交通规划在城市规划中位于从属地位,通常都是先做城市规划,之后在进行交通规划,没有反馈的话语权,从而引发了一些列交通和社会问题。本论文从此角度出发做了一些创新性的工作,即在昆明远景城市空间发展不确定的条件下,自下而上的进行交通需求预测的研究,
城市垃圾处理关乎每一个市民的环境利益,是城市重要的环境民生问题与社会问题,不仅关系到居民的道德修养程度,也是一个城市生态文明程度的标志.本文基于生态城市理念,生命周期评价方法,提出在生态城市建设中,垃圾处理规划制定的原则和主要方法.以重庆市为例,提出将分类收集率提高到30%和无害化处理率达到100%,并根据垃圾组分属性优化垃圾末端处理模式等规划措施,由生命周期环境影响和经济成本评价表明,规划方案在
It is well known that the corrosion resistance of galvanized steel can be greatly improved by means of suitable chromate based passivation.The effectiveness of chromate based passivation is without qu
It is well-known that the electrical steel of 6.5% Si has applications such as on making of high- frequency transformer due to its high electrical resistivity,low core losses,near zero magnetostrictio
Recent research that emphasizes electron backscatter diffraction ( EBSD) as a characterization tool has clarified the microstructure of dislocated martensitic steel formed by quenching moderate to lar
Requirement on the weight saving of automobiles has further been energetic for global environment and for saving natural resources.The steel which has tensile strength ( TS) more than 1,000 MPa and TS
使用真空直流磁控溅射技术在DI材表面制备Al膜,并对镀铝DI材的可加工性与制备条件及铝膜的厚度之间的关系进行了研究.杯凸和冲杯试验表明铝膜沉积时的基板温度和膜厚对铝膜的附着力和可加工性有较大影响,当铝膜厚度大于2 μm时,铝膜的附着力变差.当基板温度从室温升至200℃时,铝膜的附着性和冲压性能有明显提升。
Steel is the dominant construction material for most industrial goods such as equipment,structures,buildings or vehicles.Although there have been great advances in steel technology over the last 4 dec
Over the last decade press hardening process has become a key lightweight technology for the automotive industry worldwide because it offers ultra - high strength up to 1 500 MPa for the safety compon
Chain-Die Forming ( CDF),a novel sheet metal forming technology,has been proposed and developed recently in Australia.The primitive objective of CDF was to overcome the theoretical and practical limit