Numerical simulation of blast wave propagation in a large blast simulator

来源 :第十五届全国激波与激波管学术交流会 | 被引量 : 0次 | 上传用户:ffff2155
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
It is very significant to predict the blast wave propagation in a large blast simulator for the blast simulator design. The detailed blast wave field calls for the use of hydrocodes based on computation of fluid dynamics(CFD) theory.In this paper, a methodology of finite volume method and its numerical experimental validation case are proposed for simulating the blast wave. The hydrocodes is applied to the explosion simulation for a type of large blast simulator. After carrying out the computation, the blast wave field with unsteady and nonlinear propagation characteristics has been captured. And from the results, it is observed that the blast overpressure decreases with the distance from the explosion driver nozzles quickly, and the propagation time of the blast wave is about 0.019s for 99.6kg TNT and 50m propagation distance.
其他文献
  介绍了几种不同工况下高速航行体出水过程的模型试验研究。运用高速摄影技术实时记录了航行体模型出水的全过程,拍摄得到了出水"喷溅"的形成、发展与回落的过程,清晰地观察
本文研究了当量比φ为0.5、1.0和1.5时雾化煤油/空气混合物(气溶胶)的点火延时、自点火自发光图像和OH-PLIF图像。采用电控破膜较精确地控制高低压段压比P4/P1,通过测量破膜
  采用块结构自适应网格加密程序AMROC对DDT和直接起爆的初始过程进行数值模拟,在初始网格1mm的网格尺度下,进行加密系数分别为2,4 的三级网格加密,精细模拟DDT和直接起爆
  由于爆轰驱动激波风洞进行高温燃气实验存在的优势,提出了一种通过采用吉布斯自由能法求解热化学平衡态计算气体组分来达到爆轰驱动激波风洞状态调试的方法,该方法无需考
Numerical simulation based on the Euler equation and one-step reaction model is carried out to investigate the process of deflagration to detonation transition
  本文针对原子电子碰撞电离反应对高焓非平衡流场特性的影响,通过选取合理的热化学模型和高温气体动力学数据,对高频感应等离子体风洞石英放电管内的流场进行了数值模拟,并与
  通过多方向全息干涉法获得三维流场重构数据进而实现非定常流场测量是一种非常有效的方法,本文采用离轴式全息干涉技术从正交两方向对同一流场进行记录,得到了清晰的模型流
  利用一套基于直接吸收-扫描波长法的可调谐二极管激光器吸收光谱系统(TDLAS),对中科院力学所国家重点实验室双爆轰激波风洞运行的实验状态进行诊断.利用HITRAN2008光谱数
  激波管/激波风洞是研究高超声速来流条件下,气动力/热问题的重要实验平台,其气流品质优劣决定了实验的可靠性.因此风洞设备建设的同时,需要配以可用于多参数监测的测量手
  聚焦纹影在对垂直于光轴的特定平面内的流场细节能够充分显示,结合高速相机能实现流场的全过程记录。在聚焦纹影结合高速相机的基础上,对光源均匀性、切割光栅和CCD直接记