EFFECT OF HEATING TEMPERATURE ON THE GROWTH BEHAVIOR OF AUSTENITE GRAIN OF TITANIUM MICRO-ALLOYED ST

来源 :第七届低合金高强度钢国际会议 | 被引量 : 0次 | 上传用户:zhaojunchao2003
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  The behavior of austenite grain growth and the solution of Ti were researched by heated in an electric furnace at the temperature of 850℃ to 1250℃ for 30 min.The precipitates of Ti during the heating process were examined by transmission electron microscopy(TEM).The results indicate that the tested steel has two grain coarsening temperatures of austenite grains with the increase of heating temperature,1050℃ and 1250℃ respectively,which corresponds to the solution temperature of two precipitates of Ti,but lower than the value of the solution temperature.It is found that the activation energy of grain growth reduced from 26,561 J/mol to 239.8 KJ/mol with the dissolving of TiC precipitates by analyzing two stages of austenite grain growth process.
其他文献
The effect of Mo addition on the precipitation of carbides both in austenite and ferrite of Nbbearing HSLA steel were investigated by stress relaxation and transmission electron microscopy(TEM).Experi
International Standard ISO 6892-2 maintains that strain rate variations can induce the measurement uncertainty of mechanical properties in tensile testing,which will imperil the reliability of tension
The microstructure,mechanical property and precipitation behavior in a low carbon Nb-Ti micro-alloyed steel were investigated using dilatometer,optical microscopy and transmission electron microscope.
The influence of Nb,Mo,Cr and B on phase transformations and mechanical properties are studied in a 0.15C-2.0Mn-0.3Si-0.020Ti dual phase steel separately and in combination.The formation and decomposi
Deformation processes of microalloyed steels,both during hot and cold processing,are characterized by complex interactions between fine strain-induced precipitates and deformation activated movement o
The use of niobium as a microalloying element in high strength steels is now well-known and widely adopted.However,with recent advances in thermo-mechanical processing,inclusive of ultrafast cooling t
We examined the effects of micro-texture and grain shape on the delamination of hot-rolled high strength low alloyed(HSLA)steel sheets through a series of uniaxial tensile tests.Prior to testing,the H
The microstructure and mechanical properties of an HB400 grade abrasion resistant steel was studied with an emphasis on the initial microstructure before intercritical heat treatment.The result shows
The recrystallisation behaviour of medium carbon steels with dilute Nb addition was investigated by means of plane strain compression tests and the observation of prior austenite microstructures durin
In-situ material characterization methods such as High Temperature Confocal Laser Scanning Microscopy and hot-stage Electron Back Scattered Diffraction allow direct observation of microstructural proc