论文部分内容阅读
一、放水注意事项1.柴油机工作结束后,由于外部的环境温度过低,放冷却水应在停机15分钟之后水温有所下降时进行,否则会因机身与外部环境的温差过大致使柴油机的一些部件产生变形,进而影响柴油机的使用性能(如缸盖变形等问题)。2.放水时不能将放水开关打开后便万事大吉,还应注意观察水流的具体状况,看水流是否顺畅,是否有水
First, the water Notes 1. After the end of the diesel engine, due to the external ambient temperature is too low, put the cooling water should be shut down after 15 minutes when the water temperature drops, otherwise the temperature difference between the fuselage and the external environment will cause the diesel engine Some parts of the deformation, thereby affecting the performance of diesel engines (such as cylinder head deformation and other issues). 2. When the water can not turn on the water switch will be off, you should also observe the specific conditions of the water flow to see if the water flow is smooth, whether there is water