论文部分内容阅读
高聚物激光裂解色谱的初步研究
【出 处】
：
中国激光
【发表日期】
：
1977年4期
其他文献
Emerging miniaturized energy storage devices for microsystem applications: from design to integratio
The rapid progress of micro/nanoelectronic systems and miniaturized portable devices has tremendously increased the urgent demands for miniaturized and integrated power supplies. Miniaturized energy storage devices (MESDs), with their excellent properties
We demonstrate a new kind of multi-core photonic liquid crystal fibers (PLCFs) which have six liquid crystal cores arrayed in the ring-type geometry and separated by the air holes. Through analyzing the structure of this kind of PLCFs, it can be found tha
期刊
When light propagates through the edge or middle part of a microparticle’s incoming interface, there is a basic rule that light converges and diverges rapidly or slowly at the output port. These two parts are referred to as the region of rapid change (RRC
期刊
Zinc oxide (ZnO) microrod arrays were synthesized on Si substrate by a vapor phase transport (VPT) method in a tube furnace. The obtained ZnO microrods are characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The photoluminesce
期刊
通过激光在中碳钢基体表面熔覆NiCrBSi Ta复合涂层原位生成了TaC颗粒。利用扫描电镜(SEM)、能谱仪(EDS)和X射线衍射仪(XRD)分析涂层的形貌、成分和物相。讨论了TaC颗粒的形貌、生长机制、分布情况以及影响颗粒分布的因素。结果显示，TaC颗粒为等轴或花瓣状，其形成机制主要是独立形核生长、碰撞烧结和原位析出。TaC颗粒分布均匀，没有出现明显的梯度分布现象。TaC颗粒被基体相晶界捕获而不是被基体相吞没或推至涂层顶部，这促使颗粒均匀分布。TaC颗粒周围生长有针状铬的硼化物或碳化物，应有利于颗粒与基
采用激光诱导击穿光谱(LIBS)技术对复合肥样品中氮(N)、磷(P)和钾(K)等营养元素进行定量分析。实验中一共选取20个样品,由于样品量较少,为了提高预测精度,采取一种新的数据提取方式来建立训练集和预测集。利用PLS结合主成分分析(PCA)为训练集的光谱数据建立定标模型,定标过程中选取12个主成分。N、P、K三种元素定标模型的决定系数分别为0.99、0.98、0.99;20个样品中 N、P、K元素含量(质量分数,下同)预测的平均相对误差分别为2.33%、0.70%、3.00%。之后对定标模型的鲁棒性进行