论文部分内容阅读
我厂原生产的HB—632型碾米机,粗糠不能回碾成饲料,据市场需求我们对其分离系统做了较大的改进。改进后的产品6NF—450型全分离式碾米机,稻壳能自动回到料斗,随稻谷再次挤碾,成为粉状,和米糠(细糠)一道从米筛处排出机外,达到碾米的同时直接出饲料的要求。受到用户欢迎。主要改进处:1.将风机外壳上的3个轴承座安装孔,顺时针挪位180°角,使风机出料口从吹向后平板位置转为前平板方向,前平板上开洞让其口伸出。2.6片扇叶的焊接位置顺时针挪位旋转60°角(从皮带轮方向看),增强抽风能力。3.增加一套连接管,中间长管用卡箍固定在料
I produced the original HB-632-type rice mills, bran can not be crushed back into feed, according to market demand we made a greater improvement of its separation system. Improved product 6NF-450 fully-separated rice mill, rice husk can automatically return to the hopper, with the rice crushing again into a powder, and rice bran (rice bran) from the screen out of the machine, to grind Rice at the same time directly feed requirements. Welcome by the user. The main improvements: 1. The fan housing on the three bearing seat mounting holes, shifted 180 ° angle clockwise, the fan discharge port from the blow to the rear plate position to the direction of the front plate, the front plate hole to let it Outstretched mouth. The welding position of 2.6 blades is shifted clockwise by 60 ° (viewed from the pulley) to enhance the ventilation capacity. 3. Add a connecting tube, the middle of the tube with a clamp fixed in the material