一、制作方法利用一块园形磁片(直径10毫米,厚3毫米,约重0.5克),表面磁场一千高斯左右,把磁片镶嵌在0.22毫米的白合金片焊制的戒指环上的磁片槽内,然后用粘合剂(磁酸锌粘固粉或自凝塑胶等)固定(图1)。二、使用方法使用前先将磁戒指消毒后擦干套在术者的右手中指或食指的第二节指骨上松紧适度,磁片在手指的内侧即可进行操作(图2)。 First, the production method Using a circular disk (diameter 10 mm, thickness 3 mm, weighing about 0.5 grams), the surface magnetic field about a thousand Gauss, the magnet embedded in 0.22 mm white gold welding ring ring Magnet slot, and then with adhesive (Zinc Zinc powder or self-curing plastic, etc.) fixed (Figure 1). Second, the use of the method Before using the magnetic ring disinfected dry set in the right middle finger or index finger of the second section of the phalanx elastic moderate, the inner side of the magnetic piece can be operated (Figure 2).