【摘 要】
：
The flame propagation of methane-air mixture with various methane concentrations was experimentally investigated at venting flame acceleration tube with quadrate cross section under different obstacles presented. The flame shape and propagation speed was
【机 构】
：
Department of Chemical Engineering, Anhui University of Science & Technology, Huainan 232001, China;
论文部分内容阅读
The flame propagation of methane-air mixture with various methane concentrations was experimentally investigated at venting flame acceleration tube with quadrate cross section under different obstacles presented. The flame shape and propagation speed was observed by high-speed color video camera. The explosion pressure was determined by piezoelectricity pressure transducers. The results are: The flame propagates in the shape of a hemisphere before the flame reaches the first baffle and flame propagation speed is not more than 15 m/s. When the flame propagates across the baffle, the flame begins to accelerate due to turbulence induced by obstacle.Blockage ratio has relatively greater effect on the flame propagation speed than repeated baffle number does. The flame propagation speed and the pressure at different location along the tube are maximum when methane-air mixture is near the chemical stoichoimetric ratio. The pressure increases with the distance from ignition end at first and the maximum pressure was obtained at the middle of tube, but the pressure decreases and again increases at venting end.
其他文献
The combustion characteristics of lignite blends were studied with a thermogravimetric analyzer (t.g.a.), at constant heating rate.The characteristic temperatures were determined from the burning profiles.It was found that the characteristic times of comb
The paper introduces a kind of full-length recoverable resin-metal bolts, expounds its structural principle and stress features, and gives some instances in laboratory tests and underground tests. The results show that full-length recoverable resin-metal
The deposit scale in the coal mine shaft usually causes serious accidents, such as making rope broken, cage seized or dropped. To solve this kind of problems, the research of the cutting scale mechanism was made, and a new type of removal scale equipment
Factors that influence enterprise resource planning(ERP) implementation in enterprises were described, and according to their interaction with each other, these factors were qualitatively processed by using interpretative structural model(ISM)method, and
On the basis of analysis of the present roofbolter\'s structures, the pneumatic vane motor roofbolter was proposed and researched. Structure principle of MFT-80Y type pneumatic vane motor roofbolter was expounded, a new project of the rotary shearing me
Analyzed the main problems which were found in current conditions and prob-lems of informationization in coal enterprises. It clarified how to achieve informationizationin coal mine and put forward a general configuration of informationization constructio
To enhance the technology and efficiency of strata injection is a problem to be solved urgently. Because of effected by the rough and poor production conditions of mining and the changeable bearing condition of strata, the technological process of injecti
During mining or road-way development, the distribution of stress and coal pore pressure in the coal face and rib around the new opening will change, under certain conditions, dynamic failure of coal in the form of an outburst can occur. In the modeling s
Rock drillability reflects the drill bit fragments rock hardly or easily. At present, rock drillability classification indexes have rock single-axle compressive strength, point load intensity,fracture stress during chiseling, drill speed, chiseling specif
The numerical model was presented for the coal combustion in the packed bed.The bifurcation characteristic of the ignition-extinction of solid-phase smoldering and transition to flaming was studied for the packed bed of coal. One of the Frank-Kamenetskii