论文部分内容阅读
水龙头用久了,多会出点小毛病,这里介绍几种维修的方法。 △漏水不止。这是阀芯上的垫圈磨损、老化破裂造成的。应找块橡胶皮,按原垫尺寸剪好更换上即可。 △噪声振动。打开水龙头即有振动,并发出刺耳噪声,这是水流顶起阀芯撞出阀杆引起的,应更换阀芯上的垫圈,方法同上。 △滑丝。水龙头拧不紧,用线绳捆不住。这是阀杆与水龙头连接的螺丝滑丝了。用扳手拧开六角形阀,再用同一型号的螺丝帽套在阀杆上拧紧,装上即可。
Faucet with a long time, will be more than a small problem, here are several ways to repair. △ leak more than. This is caused by wear and tear of the gasket on the valve plug and aging cracks. Should find a piece of rubber skin, cut according to the size of the original mat can be replaced. △ noise vibration. Turn on the faucet that is vibrated, and issued a jarring noise, which is caused by the water flow from the top of the spool hit the valve stem, the gasket should be replaced on the spool, the method above. △ sliding wire. Tighten the tap, tied with a rope. This is the stem and faucet screw connected to the screw. Use a wrench to unscrew the hexagonal valve, and then tighten the same type of screw cap sleeve on the valve stem, can be installed.