【摘 要】
：
In order to test mild aspheric surface directly without other null optics, the digital plane method is proposed. When departure of the tested aspheric surface is mild, a sphere mirror can be used as the reference surface. The phase distribution can be mea
【机 构】
：
KeyLaboratoryofOpticalSystemAdvancedManufacturingTechnology,ChangchunInstituteofOptics,FineMechanics
【出 处】
：
ChineseOpticsLetters
论文部分内容阅读
In order to test mild aspheric surface directly without other null optics, the digital plane method is proposed. When departure of the tested aspheric surface is mild, a sphere mirror can be used as the reference surface. The phase distribution can be measured swiftly by the digital interferometer. The surface error can be -obtained by subtracting the theory wavefront error (the value of the digital plane) from the phase data and eliminating the translation errors through least-squares fitting. The basic principle and theory of this method are analyzed and researched, and the testing model and flow chart are established. Meanwhile the experiment is carried out with a mild aspheric mirror by this method, the PV and RMS of the surface error are 0.173l and 0.018l (l is 632.8 nm), respectively. We also design and make a null corrector to the asphere for contrast, the differences in PV and RMS error between them are 0.026l and 0.001l, respectively.
其他文献
本文在一维布喇格衍射分析方法的基础上,导出了两维时的衍射场光能量分布,给出了相应的实验结果.分析了影响衍射光光斑能量分布的主要因素,最后提出了综合考虑衍射效率,上升时间、光斑形状的新的设计思想.
We demonstrated long-period grating (LPG) inscription on polymer functionalized optical microfibers and its applications in optical sensing. Optical microfibers were functionalized with ultraviolet-sensitive polymethyl methacrylate jackets and, thus, LPGs
采用长焦距透镜与连续介质气体靶是目前高亮度高次谐波产生实验中谐波产率较高的方案, 在长焦距透镜方案中进一步探索使用准相位匹配技术, 有望在连续介质靶的基础上进一步提高高次谐波信号的强度。根据准相位匹配技术, 设计了一种多喷嘴阵列气体靶, 通过模拟计算的方法, 对比传统连续介质气体靶与多喷嘴气体靶这两种方案, 从理论上证实多喷嘴气体靶可以实现谐波信号强度的进一步提升。
An interview with Prof. Michal Lipson by Prof. Guoqing Chang traces Lipson’s professional pathway in the field of silicon photonics.
苯酚、间甲酚和百里酚由于光谱重叠严重，用常规的分析法较难直接检测。采用三维荧光光谱技术与平行因子分析相结合的方法可同时测定苯酚、间甲酚和百里酚。结果表明，在苯酚、间甲酚和百里酚共同存在下，用平行因子算法得到的苯酚和百里酚分辨结果较好，平均回收率分别为(95.23±2.55)%和(102.8±1.97)%；间甲酚得到的分辨质量浓度偏离实际质量浓度较大。同时，研究了3种酚类的两两混合物，得到的结果优于3种酚类共同存在下得到的结果，用品质因子评估了算法的准确性。实验结果表明，用平行因子算法与三维荧光光谱分析相结
为改善结合界面的状况,缩短工艺流程,降低铜的消耗,减少生产投入,采用选择性激光烧结成型技术快速制备多孔石墨成型件。在此基础上,研究了不同石墨预制体状态、电镀工艺参数和电镀时间对镀层的沉积速率、表观形貌以及镀层与基体结合状况的影响。结果表明:未经真空压力浸渍酚醛树脂的石墨预制体,其镀层与基体的结合力不符合应用要求,在真空压力下浸渍酚醛树脂2~3次后,镀层沉积速率较佳,镀层与基体的结合力符合应用要求;电镀时间为30~50 min时,沉积速率较佳,可得到表面覆盖完整、连续且有光泽的镀层;电流密度为5×10
美国ARO公司为环境保护局的控制系统实验室研制成一台激光火焰分析仪，用它可以研究工业用炉中的燃烧，而不扰动燃烧过程。该装置已交付给环境保护局的实验室，将用来研究燃烧煤、油或气体的典型工业用炉中的燃烧现象。该项研究的目的旨在寻找一种改进燃烧过程以减少大气污染物的形成的方法。