机械式高周波淬火机的感应器母线板是用厚度8～10毫米的紫銅板制造的。一般的感应器母綫板尺寸如图1所示。每一套感应器需要一对,用銅約3公斤,以一台拖拉机每种高頻淬火工件做一套感应器計算,就需100公斤紫銅板。目前銅在我国比較缺乏,为了节約,我們改进了母线板的設計,把原来的母綫板改小成图2,另外再加一个固定的公用的中間接触板(如图3),两者用銅螺絲联接在一起。这个中間接触板的数量,根据工件淬火区 Mechanical high frequency quenching machine sensor board is made of copper plate thickness of 8 to 10 mm. General sensor bus board size shown in Figure 1. Each sensor requires a pair, with about 3 kg of copper, with a tractor for each induction hardening of the workpiece to do a calculation, you need 100 kg of copper plate. At present, copper is relatively lacking in our country. In order to save money, we have improved the design of the busbar board, and changed the original busbar board to Figure 2, plus a fixed common intermediate contact board (as shown in Figure 3) Use copper screws to connect together. The number of this intermediate contact plate, according to the workpiece quenching zone