Electrochemical performance of alloys Ho5Fe3CO12 and Ho33.3Co66.7

来源 :稀土学报(英文版) | 被引量 : 0次 | 上传用户:sunping521
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Alloys with composition Ho5Fe3Co12 and Ho33.3Co66.7 were prepared and examined by X-ray diffractometer and automatic battery testing instrument.The electrochemical properties of these alloys such as discharge capacity,cycling performance and high rate dischargeability were investigated by battery testing instruments in alkaline electrolyte.A comparison of the electrochemical performance of the Ho5Fe3Co12 and Ho33.3Co66.7 alloys revealed that alloy Ho5Fe3Co12 possessed a better electrochemical performance and had better discharge capacity,cycle stability and high rate dischargeability.The largest discharge capacity of alloy Ho5Fe3Co12 was about 536.7 mAh/g at discharge current densities 450 and 600 mA/g,and that of alloy Ho33.3Co66.7 was 400 mAh/g at discharge current density of 300 mA/g.
其他文献
Scandium (Sc) concentration from the rare earth ore by high gradient magnetic separation (HGMS) was determined on the basis of Sc content,geophysical parameter
The effect of Al-substitution on the electrochemical performances of Li3V2(PO4)3 cathode materials was studied. Samples with stoichiometric proportion of Li3Alx
The feasibility of using sodium sulfide as the sole modifier for the flotation of Xinhua molybdenite ore was examined. The potential mechanisms involved in the
The conditions of ZnO-Al2O3 aqueous suspensions and slip casting were optimized to obtain dense green compacts and further to obtain high density ZnO-Al2O3 cera
在城市景观中应用植物色彩时需要遵循必要的设计原则,即色彩规划和城市形象的统一性、色彩和时间的和谐性以及色彩距离感与城市景观设计的合理性。本文结合,某城市花园景观设
Micro-arc oxidation (MAO) coating was prepared on Ti6Al4V alloy surface and its characterizations were detected by Vickers hardness tester, profilometer, scanni
A new apparatus was designed to measure the electromagnetic force and a computational study of the traveling magnetic field (TMF) and its application to the Ga-
The SmBaCuMO5+δ (M=Fe,Co,Ni) (SBCM) powders were synthesized by the citrate sol-gel method and the powders were sintered to ceramic pellets.The powders and sin
Indium tin oxide (ITO) nanopowders were prepared by a modified chemical co-precipitation process. The influence of different SnO2 contents on the decomposition
La2/3Sr1/3MnO3/La1.4Sr1.6Mn2O7 composites with arbitrary weight percentage were prepared using a one-step sofid-state reaction method.The experimental results d