论文部分内容阅读
尼龙平皮带挠性好,传动效率高,滞轮直径可以做得很小,工作平稳可靠。采用薄而轻的尼龙片基平带时,有很多工作场合是不允许用搭扣连接的。而是用高强力粘合剂粘接。粘接时需要在一定压力下加热到一定温度,并保持一定时间,才能达到最佳粘接效果。为此,我们设计制作了一台简易压力加热器。用自耦调压器调节电压,从而得到粘接时所需要的温度。其结构组成如图1所示。由蝶形螺钉l、压板2、螺柱3、弹簧限位器4、加热体5、电烙铁6等组成(压板2和加热体5用导热性较好的材
Nylon flat belt with good flexibility, transmission efficiency, hysteresis wheel diameter can be done very small, stable and reliable. When using thin and light nylon flat belt, there are many workplaces are not allowed to use buckle connection. But with high-strength adhesive bonding. Need to be heated under pressure to a certain temperature bonding, and maintain a certain time, in order to achieve the best bonding effect. To this end, we designed a simple pressure heater. Adjust the voltage with an autotransformer to get the temperature you need for bonding. Its structure is shown in Figure 1. By the butterfly screw l, plate 2, stud 3, the spring stopper 4, the heating body 5, electric iron 6 and other components (platen 2 and the heating body 5 with good thermal conductivity of the material